產品名稱 : WMP-24J Fanless Whiskey Lake 24"
產品描述
  • Mobile Intel® Whiskey Lake Core i CPU
  • The newest regulation EN/UL 60601-1 & 60601-1-2
  • 23.8" FHD AHVA Diagnostic Panel w/ P-Cap Multi-Touch
  • Hot-Swappable Batteries X3 Capacity
  • Fanless Design with Reliable Thermal Solution
  • Dual storage w/ M.2 NVMe SSD & 2.5” drive (w/doggy door)
  • Hospital white plastic housing with anti-bacteria treatment
  • 4KV isolated I/O kit, DICOM GSDF Calibration and More Options for Diversified Applications
  • Support PCIex4 Expansion Slot

eNews: Wincomm Announced Whiskey Lake Fanless Hot Swappable Batteries Medical Panel PC with 22 to 24 inch Touch Panel Series


產品介紹
Best Suit for Non-Powered Medical Carts
Up to Three Hot Swappable Batteries
These medical cart panel PC with hot swappable batteries are designed to be used with non-powered carts. Hot swap batteries provide up to 8-10 hours of up time on a single charge. Wincomm innovated i-Control intelligent management SW to optimize CPU, Thermal, and Power performance to utilize computing performance to secure medical professionals using safty in any condition while under mobile medical cart applications. 

  • Anti-MRSA Housing stands up to Chemical Disinfection
    These medical cart computers have an special antimicrobial housing, including touch panel, to battle surface contamination (MRSA), an IP65 rated sealed front bezel making it easy to clean and disinfect.
  • Global Latest UL/cUL 60601-1 and IEC60601-1 & 60601-1-2 Medical Certifications (MDR Ready) 
    Medical grade, and certified to be safe for near patient use. These computers were designed from the ground up to meet global medical safety standards.
  • 8th Gen Intel Core CPU
    Our medical cart computers WMP-J series offer the 8th generation Intel Core i3/i5/i7 processor series. 
    1. Support Intel® Vpro Technology by CPU suit for intelligent remote control SW management,
    2. FHD video real-time streaming to support hospital theatre on real-time surgical imaging needs.
    3. 5M Webcam & RFID antenna & TPM 2.0 & Display Interface for up to 2, and HDMI Video-In
    4. USB 3.1 Gen II X 4, Optional USB X 2
    5. Expansion PCIx4 for Optional Video Capture Card, Vision Acceleration Card Support
    6. Optional Light Sensor for Auto-Dimming to be Friendly During Ward Round
    7. Optional DICOM Part 14 Module 

Hot Swappable Batteries x 3 – normal operation time over 8-10 hours for nursing cart usage

Hot Swappable Batteries Designed by Wincomm Featured:

  • Compatible with all WMP G/H/J series
  • Battery Indicator LED light
  • Medical Grade Certification with WMP G/H/J series
  • Non-stop Swappable Battery architecture
  • High Electricity Current Battery to fulfill High Medical Image Process
proimages/products/WMP-22G/WMP-22G_Battery_web.jpg
proimages/seefeature/WMP_GH/WMP2.jpg

FHD, MVA panel, True 8 bit-Visual Clearance to Secure Medical Image Safety

proimages/seefeature/pic-03.jpg

FHD MVA Panel Featured:

Consistently Clear and Precise Images

  • Wide view angle: 178(H)/178(V)
  • High CR, 3000:1
  • Up to 16.7M Colors w/RGB 8 bit
  • 16:9, LED Backlight

Product Outlook & Friendly Hot-Key Design

proimages/products/WMP-22G24G_Outlook.png

30 Watt Power Output for External Device

proimages/products/WMP-24J/WMP-22J_30W_Power_Output_Card_4.png
Specification
ModelWMP 24J  IP0A (STD)WMP 24J  IP0B (ISO)
Main System
CPU / Chipset FCBGA1528 Intel® Whiskey Lake Core i7/i5 processor (15W Max.) Optional Vpro by Core i7/i5 CPU
Graphic Intel® integrated HD Graphics 620
RAM Two DDR4 Dual-2400MHz RAM, non-ECC, x2 SO-DIMM socket, up to 64GB
OS Support Optional Win 10 IoT Enterprise LTSC, Win 11 IoT Enterprise GAC
Storage 1 x M.2 NVMe SSD (M Key 2242/2260/2280) PCIex4, 1 x 2.5” SATA3 SSD/HDD w/ doggy door
Expansion 1 x PCIex4 (25W Max.), 1 x M.2 Type E Optional Network Interface: 802.11 ac/a/b/g/n (or Wifi-6) WLAN + Bluetooth module
Display Size 23.8” wide TFT-Color LCD (16:9)
Display 1920 x 1080 (Full HD), 16.7M colors, 178(H) / 178(V),
250 nits (Typ. Center point), CR:3000 : 1 (Typ)
Touch Screen Projected Capacitive Multi-Touch Panel / Light Transmission: ≧85% / Hardness: ≧7H pencil, pressure 765g/45° / Life: 50000
I.O. Ports
USB 4 x USB3.1 gen II  4 x USB3.1 gen II
1 x ISO USB2.0 4 x USB3.1 gen II 
COM 1 x RS232/RS422/RS485
1 x RS-232 
1 x ISO RS232/RS422/RS485
1 x ISO COM RS232
LAN 2 x RJ45 2 x RJ45, 1x ISO RJ45
Audio 2 x 3.5mm phone jack connector (Line-out, Mic-In)
Video Out 2 x DP, 1 x HDMI video-in
Reading light Light bar x 2 (at housing bottom side)
Control Hot Key (R to L) Battery LED Indicator, Power On/Off, Volume +/-, Brightness +/-, Reading Light, LCD Backlight On/Off, Clean Me, Function Key
Mechanical and Environmental
Cooling Fanless
Battery Pack Optional 3 x DR-202 Series, Lithium-ion Battery w/ Hot-Swappable Design
Power Input  DC-In x 1,  DC 14~24V input
Power Adapter AC input 100~240V / 47 ~ 63 Hz / DC output 24V, 180W
Temperature Operating Temperature: 0~40℃ (Burn-in, not airtight, W/ Battery 0~35℃) / Storage Temperature: -20~60℃
Humidity Operating & Storage:10 ~ 90%, non-condensing
IP Rating / Housing IP65 (Front Side),IPX1 for whole system / Front: Full flat design/ Touch (standard)/
Glass( customized); Rear: Plastic White w/Anti-bacteria (MRSA), Housing
Dimensions (Net) 594 x 397 x 56 mm
Weights (Net) 9.0 kg (w/o power adapter/battery pack)
Mounting Optional Stand, VESA 100
Certification
CE: EN 60601-1-2:2015(V4.0)
EN 60601-1:2006 + A11: 2011 + A1: 2013 + A12: 2014 Compliance
VCCI: 2016-11, Class B (PSU/Battery with PSE)
FCC: Part 18 Class B
UL: ANSI/AAMI ES60601-1:2012 (V3.1)
cUL: CAN/CSA-C22.2 No. 60601-1:2014 (V3.1)
ISO 14971 / IEC62133
Options & Customization

Major Options & Customization

Battery & Charger

1.Battery Pack: 3 x DR-202 Series, Lithium-ion Battery w/ Hot-Swappable Design
2.Battery Charger Station: JW202W2 3-Slot w/200W Power Adaptor

Add On Parts

1. 5MP Auto Focus Webcam
2. TPM 2.0 module
3. Smart Card Reader at side or CAC / PIV Reader (FIPS-201) (different rear housing)
4. RFID Reader (13.56MHz)
5. AG Film (Can’t exist with DICOM module)
6. Wifi WLAN + Bluetooth w/ 2x Antenna
7. M.2 NVMe SSD 
8. SATA 2.5” HDD Module
9. Equipotential Terminal Pin
10. Full HD Capture Card or 4K SC710N1 12G SDI Capture Card
11. USB 2.0 x 2 at Side (different rear housing)
12. 5V1A Power Jack (for standard type)
13. DICOM Part 14 Compliance
14. DC-DC Extension Cable (2 meter)
15. I/O Cover (for better Cables Management)
16. White Color Metal Desktop Stand with Anti-bacterial Treatment
17. 30 Watt Power output card for external device

Customization

1. Temper Glass 
2. COM Port Support 5V1A 
3. AG Coating
4. UHD 4K2K (No Video-in)
5. Light Sensor for Auto Brightness (can’t co-exist with webcam)

proimages/products/WMP-24G/WMP-24G_DW-01-01.JPG
e-News Subscribe

電子報訂閱